top of page
wix product hero backgrounds_loop.png

Valiant 153M

GB-GRAM/GB-GRAM-M Interface Card

Valiant 153M

PRODUCT   |   GNSS TESTING & SIMULATION

Compatibility

GB-GRAM Type I
GB-GRAM Type II
GB-GRAM-M Type I
GB-GRAM-M Type II

Size

4.1" x 2.9" (length x width)

Weight

approx. 60 grams

Power

< 0.5W (without GB-GRAM/M)

Operating Temperature

-20 ͦ C to +65 ͦ C

About

Valiant 153M is a GB-GRAM/GB-GRAM-M (GB-GRAM/M) interface card that allows the simultaneous operation and testing of a commercial- off-the-shelf (COTS) receiver and a GB-GRAM/M. Both receivers are powered and communicate using a single USB mini cable. By integrating a COTS receiver onto the Valiant 153M, users can perform cross-checks to determine if the military receiver is connected and communicating data properly. Both receivers communicate via the onboard USB mini or RS-232 serial connectors. The Valiant test fixture was designed to be nearly the same size as the GB-GRAM/M type I card.

Applications

The Valiant 153M excels within valuable criteria for testing in lab and field test environments.

COTS Receiver

GB-GRAM/M

The integrated COTS receiver allows test engineers to confirm that their setup and receiver is properly configured. By observing the data output, engineers can know for certain that their antenna, power, and communication is successfully connected to the Valiant interface card. From there, cross-checks can be performed to make sure the military receiver is reporting the same data as the COTS receiver. The COTS can also act as another unit under test (UUT) during the field test.

It is slightly larger than the type I card so that the GB-GRAM/M can be fully placed inside the case. The Valiant 153M can be powered by a USB mini cable, or a 5V wall wart providing options for test engineers. Not only does the USB mini power the board and both receivers (legacy GB-GRAM) but it can also provide data communication for both the GB-GRAM/M and the integrated Ublox receiver. Finally, with one RF input, you can provide GPS signals to two receivers allowing for more UUT’s.

The proper operation of the two receivers can be examined using Safran’s software suite, RxStudio. This software suite allows a user to communicate to the receivers simultaneously and visually examine their performance (C/No, SVs tracked, SVs used, LLA, time, code types, assurance, frequency, etc).

  • View Data Outputs
    ✔ Average # of SVs Used ✔ Average # of SVs Locked ✔ Average Position Error ✔ Average Velocity Error ✔ Average Pulse Error ✔ Average Date ✔ Percent Frames Received ✔ Percent < Threshold ✔ Percent of Time Fixed ✔ Percent of Frames Fixed ✔ Time of First Fix ✔ Time of First Loss ✔ Time of Last Fix
  • View Data Outputs
    ✔ Average # of SVs Used ✔ Average # of SVs Locked ✔ Average Position Error ✔ Average Velocity Error ✔ Average Pulse Error ✔ Average Date ✔ Percent Frames Received ✔ Percent < Threshold ✔ Percent of Time Fixed ✔ Percent of Frames Fixed ✔ Time of First Fix ✔ Time of First Loss ✔ Time of Last Fix

Specifications

Click to download the Valiant 153M data sheets. 

bottom of page