GNSS Testing & Simulation | Safran Federal Systems

top of page

Home • Products • GNSS Testing & Simulation

GNSS Testing & Simulation

Safran Federal Systems is a leading provider of advanced GNSS Testing & Simulation systems and tools for NAVWAR environments.

Browse Simulators

The Skydel Simulation Engine

Advanced GNSS Simulation Software

Test a wide range of applications with advanced GNSS Simulators and helpful tools that generate basic scenarios all the way to complex threat environments, leveraging the power and scalability of the Skydel Simulation Engine. Skydel powers each of Safran Federal System's advanced software-defined simulators including BroadSim, BroadSim Solo, BroadSim Anechoic and BroadSim Wavefront.

THE SKYDEL SIMULATION ENGINE

BroadSim

Test GNSS & PNT Sensors

BroadSim simplifies advanced jamming and spoofing scenarios for Navigation Warfare (NAVWAR) testing. It supports high dynamics, jamming, spoofing, alternative RF navigation, and encrypted military codes. Simultaneously simulate multiple constellations, including GPS, GLONASS, Galileo, Beidou, and SBAS. Boasting high-performing hardware, an innovative software engine, and an intuitive user interface, BroadSim is the ultimate testing solution.

BroadSim Solo

Advanced Scenario Creation at Your Desk

Bring advanced GNSS scenario creation to your desk and propel development cycles. Take advantage of software-defined benefits like the ability to simulate multiple constellations including AES M-Code, an intuitive user interface, high-dynamics, innovative features and ultra-low latency. BroadSim Solo's compact form factor fits nicely at your desk or workstation without taking over your space.

BroadSim Duo

Compact Dual Frequency GNSS Testing Powerhouse

A successor to the widely adopted BroadSim Solo, the Duo is engineered to enable dual frequency GNSS simulation with support for essential unclassified signals like GPS P-Code and AES M-Code. This capability makes the BroadSim Duo an indispensable tool across a wide range of engineering applications, particularly where using fully classified simulators is untenable due to cost or security limitations.

BroadSim Wavefront

Test CRPA Electronics

BroadSim Wavefront is designed for multi-element antenna testing like CRPA’s. Calibrate GNSS frequencies in a matter of seconds. Simulate spoofers, jammers, repeaters, and alternate PNT sensors with just a few clicks, and signals all-in-view. The system is scalable from 4-16 elements at 600+ signals per element and 1,000 Hz iteration rate, and maintains a phase coherence of 1° 1σ.

BROADSIM WAVEFRONT

BroadSim Anechoic

Test Entire PNT Systems

Accurately simulate real-world GNSS environments in your Anechoic Chamber. BroadSim Anechoic has 32 individual RF outputs enabling the system to drive 16 dual-frequency antennas, giving you complete signal control and high dynamic range. Features like automatic antenna mapping, automatic time delay calibration, and automatic power loss calibration cuts calibration times from days to minutes.

BROADSIM ANECHOIC

Browse GNSS Testing

PRODUCT |

Valiant 153M

GB-GRAM/GB-GRAM-M Interface Card

Validate your military receiver's performance with Valiant 153M. Designed to be nearly the same size as the GB-GRAM/M type I card, the test fixture allows simultaneous operation and testing of a commercial- off-the-shelf (COTS) receiver and a GB-GRAM/M, powered by a single USB mini cable.

Valiant153 - case open-attached small.png

VALIANT 153M

PRODUCT |

Panacea

Autonomous PNT Test Suite

PANACEA is an autonomous GNSS performance and threat environment simulator system designed to control simulation hardware and collect data from up to 32 GNSS receivers simultaneously.

Valiant153 - case open-attached small.png

PANACEA

PRODUCT |

Panacea Field Test

Collect PVT Data Autonomously

PANACEA Field Test (PANACEA FT) is a software tool that allows for easy data collection from multiple receivers in a real-world environment where the GNSS receivers are connected to an antenna. All the data is logged, time-stamped, and automatically compared to the configured truth source.

Valiant153 - case open-attached small.png

PANACEA FIELD TEST

PRODUCT |

RxStudio

Collect Real-Time Receiver Data

RxStudio is an easy-to-use software platform that enables users to monitor and log GNSS receiver data in real-time. RxStudio was developed as a plug-and-play architecture compatible with over 100 GNSS receivers, outputting and logging receiver data in a common format. Support for new receivers is implemented on a regular basis.

Valiant153 - case open-attached small.png

RXSTUDIO

PRODUCT |

Panorama

Visually Analyze Receiver Data

Panorama is the flagship tool for analyzing receiver data. You'll spend more time looking at plots and making decisions, instead of making plots and writing reports. Panorama takes receiver data and turns it into over 60 ready-to-view engineering plots. giving you the ability to view summary level data, head to head comparisons, receiver-specific results, and 3D LLA replays using STK.

Valiant153 - case open-attached small.png

PANORAMA

Ask An Expert

Have a question about how to use your Skydel-powered system or a certain feature? Leverage Safran's online user community and get the answers you need.

SKYDEL USER FORUMS

bottom of page